 |
 |
 |
|
This ESC is pre-soldered with Walkera style plugs so pilots can easily use it on Walkera helicopters as the main motor ESC.
The stock software has been modified to increase max speed by 15%. It increases the standard XP-12A from 80000RPM to 92000RPM for a 6 poles brushless motor.
This ESC can still be programmed with BLHeli but the BLHeli firmware will overwrite any "High Speed" software modifications resulting in a standard XP-12A.
- Equipped with high-speed, small-sized, multifunctional MCU.
- Full protection feature including low-voltage protection, over-heat protection, signal loss protection, safe power on protection, and self-check functions.
- Excellent startup performance, great throttle linear and quick throttle response, excellent low speed performance.
- Max Speed: 240,000 RPM (2 poles), 80,000 RPM (6 poles), 40,000 RPM (12 poles).
- Individual power circuit for MCU and BEC to improve anti-interference capability.
- The parameters of the ESC can be configured via program card or transmitter.
- Program card is displayed by LED panel, makes settings easy.
- The low-voltage threshold and start-up power can be programmed.
- Throttle range can be configured to be compatible with different receivers.
- Three throttle curve options make helicopter control more flexible.
- Motor reverse rotation available.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Can be flashed with BLheli code for governed head speed. Select BLheli Main or Tail code in the extras section before adding to cart for flashing services.
- Input voltage: 3V-13V (support 1-3 lithium batteries)
- Continue current: 12A
- Burst current: 15A (within 10 seconds)
- BEC output: 1A/5V (linear)
- Size( length X width X high): 22x17x7 mm
- Weight is 5.4g including all wires and plugs which is 2.6g less than with the original wires and plugs
|
|
|
|
|
|
|